Developed by Defcon Films Australia
4WD PAINT PROTECTION FILM
FleetArmour and the gloss lines for four wheel drives and fleets.
Films That Match How
4WDs Actually Get Used
Off-road panels take hits that showroom cars never see, which is why the Defcon range splits the job: FleetArmour as the cost-efficient sacrificial layer for wear-and-tear zones, and the gloss lines, warranted up to 12 years, where the truck is also the trophy.
Both are ordered in the same place, so a shop quoting a mine-spec fleet and a weekend tourer buys from one supplier.
FleetArmour On
The Hard Zones
Tray sides, sills, bonnet leading edges and high-abrasion zones are FleetArmour territory: a sacrificial layer made for wear and tear, straightforward to install on large flat sections, backed by a 3-year limited warranty.
Fleet operators and mining-region shops order it for protection volume rather than finish.
Gloss Lines For
The Tourers
For 4WDs that live on gloss, Glanz carries the 190±10% micron TPU construction with close to 10 kg single-point puncture resistance and ARPANSA-tested UV protection. Defcon ONE, the flagship gloss line, is coming soon.
The 13-micron self-healing top coat pulls minor scrub scratches back out under the Australian sun, which 4WD panels get plenty of.
Trade Pricing &
Sample Rolls
4WD and fleet work runs on volume, and FleetArmour is priced for it.
Off-road panels are the real test: request a free sample roll of FleetArmour and lay a rock slider or tray side before you commit, so you know how it handles the abrasion zones your customers actually damage.
Warranty
By Film Line
The warranty follows the job: FleetArmour carries 3 years and is priced as a sacrificial layer to be replaced, the gloss lines carry 10 years on Glanz and 12 on Defcon ONE at launch, for the weekend tourer that wants finish protected too. Terms are on the warranty page.
Fleet vehicles register individually in e-Warranty within 7 days of invoice, so a mine-spec contract has a record per vehicle.
Wear on abrasion zones is not a defect and FleetArmour is priced for replacement; what is covered is defined on the warranty page.
Consumables In
The Same Order
Installation consumables ship with the film: DFA Surface Cleaner in 24-can cartons and Installation Gel in 16-litre drums sit in the same catalogue, so one order covers film, prep and slip solution.
Surface preparation is also a warranty condition: cover requires a clean, contaminant-free surface at installation, so running approved prep products protects both the job and the claim.
FAQ
-
Do I need a trade account to order?
For fleet and 4WD accounts, contact the team; FleetArmour and the gloss lines ship from the online shop.
-
Can I test the film before ordering?
Yes. Request a free sample roll and run it through your own installation process, or order the Defcon Practice Pack to train on real film before touching customer stock.
-
How deep a scratch will the film self-heal?
The self-healing clear coat is about 13 microns thick. Scratches contained in that layer repair with heat from sunlight or warm water. Anything that cuts through the clear coat is permanent, and that section should be replaced.
-
Can the film go on surfaces other than cars?
Yes. Defcon PPF installs on any smooth painted surface, which is why sign writers and asset owners use it beyond vehicles. Chrome is also workable: test a small patch first and show the customer before wrapping the full trim.
-
How long does the film last?
Defcon ONE carries a 12-year warranty and Glanz a 10-year warranty covering yellowing, staining, bubbling, peeling and cracking, so the film you sell is warranted for close to the ownership life of most vehicles.
-
What maintenance should end customers follow?
No special maintenance is needed beyond regular cleaning. The self-healing top coat handles minor wash marks with heat, and full care terms sit alongside the warranty conditions on the warranty page.
-
Do you offer support in Chinese?
Yes. Bilingual consultation in English and Chinese is available through our WeChat channel, covering product selection, ordering and technical questions. 我们提供中英双语咨询。
Developed by Defcon Films Australia
Every Defcon film is built for Australian conditions: materials selected globally, proven on local roads, and made to install well.
