Developed by Defcon Films Australia
BUSHWRAPZ ALTERNATIVE
Sacrificial PPF for 4WD and fleet panels, sold to installers by the roll.
Looking for a BushWrapz alternative usually means wanting sacrificial film for the 4WD panels that branches and gravel reach. Defcon FleetArmour is that kind of film: a cost-efficient gloss PPF made as a sacrificial layer, sold to installers in 1.52 m x 15 m rolls with a 3-year limited warranty. This page does not score another brand. It explains where FleetArmour fits, how it is cut and installed, and how to test it on a tray side before you commit.
A Sacrificial Layer
For 4WD Panels
FleetArmour goes on tray sides, sills, rock sliders and other high-abrasion zones on 4WDs, mining vehicles and fleets. It is priced so a worn section can be replaced rather than repaired.
Wear on abrasion zones is not a defect. What is covered is defined on the warranty page.
Rolls Cut In-House,
Not Kits
Defcon film is supplied in full rolls and cut in-house with OEMC pattern software on the DFA Plotter. Precut kits are not part of the range, so FleetArmour is a film for workshops and installers.
It is straightforward to install on large flat sections, which is most of what an off-road build needs covered.
Gloss Film Where
Finish Matters
For the bonnet and front end, where the owner wants the finish kept, Glanz carries the 190 microns ±10% TPU construction with close to 10 kg single-point puncture resistance, a 13-micron self-healing top coat and ARPANSA-tested UV protection.
Which Film
On Which Panel
The 4WD paint protection film guide covers build-specific advice, and the which film on which panel article maps the split between sacrificial and gloss film.
Model notes for the Ford Ranger and LandCruiser 300 are on the Ranger and LandCruiser 300 PPF page.
Warranty And
Registration
FleetArmour is backed by a 3-year limited warranty under normal use and proper installation.
Fleet vehicles register individually in e-Warranty within 7 days of invoice, so a mine-spec contract has a record per vehicle.
Glanz carries 10 years for the tourer that wants its finish protected too.
Ordering And
Freight
Rolls are listed ex. GST in the online shop with no account needed to order. Orders over $1000 ex. GST ship free Australia-wide from Melbourne.
Request a free sample roll of FleetArmour and lay a rock slider or tray side before you commit.
Fleets And
Volume
Fleet operators and mining-region shops order FleetArmour for protection volume rather than finish. The fleet protection film page covers fleet supply.
For volume terms, contact the team with your expected monthly roll count.
FAQ
-
What is an alternative to BushWrapz?
Defcon FleetArmour is a sacrificial gloss PPF for tray sides, sills, rock sliders and other high-abrasion 4WD panels. It is sold to installers in 1.52 m x 15 m rolls with a 3-year limited warranty.
-
Is FleetArmour a precut kit?
No. Defcon film is supplied in full rolls and cut in-house with OEMC pattern software; precut kits are not part of the range.
-
Where does FleetArmour go on a 4WD?
Tray sides, sills, rock sliders, bonnet leading edges and other high-abrasion zones where damage is routine and panels are large.
-
How long is the FleetArmour warranty?
3 years, a limited warranty under normal use and proper installation, registered through e-Warranty.
-
Can I test the film before ordering?
Yes. Request a free sample roll and run it through your own installation process before buying a roll.
-
Do I need a trade account to order?
No. Prices are listed ex. GST in the online shop and anyone ordering for a workshop can buy without an account; contact the team for volume terms.
-
Do you offer support in Chinese?
Yes. Bilingual consultation in English and Chinese is available through our WeChat channel, covering product selection, ordering and technical questions. 我们提供中英双语咨询。
Developed by Defcon Films Australia
Every Defcon film is built for Australian conditions: materials selected globally, proven on local roads, and made to install well.