Developed by Defcon Films Australia
FLEET PROTECTION FILM
Coverage film for vehicles that cop hits every day.
Fleet protection film has to be fast to install, priced to replace and tough on the panels that take the abuse. Defcon FleetArmour is built for that job: a sacrificial PPF for tray sides, sills, rock sliders and other high-abrasion zones on utes, 4WDs and work vehicles. It is ordered by the roll at 1.52 m x 15 m and backed by a 3-year limited warranty. When a section wears through, it is stripped and re-filmed rather than repaired. This page covers how fleet jobs are planned and ordered.
Fleet Work Is A
Different Job
A showroom bonnet is filmed once and admired. A fleet ute is filmed, driven into a quarry, scraped on a gate and filmed again. The film for that job has to be fast to install, priced to replace and tough on the panels that take the abuse.
Defcon FleetArmour is built for that: a sacrificial PPF layer for tray sides, sills, rock sliders and other high-abrasion zones, ordered by the roll at 1.52 m x 15 m and backed by a 3-year limited warranty.
Sacrificial By
Design
FleetArmour is priced so the film can be replaced rather than repaired. When a panel section wears through, it is stripped and re-filmed; the paint underneath stays original, which is what the fleet manager is paying for at resale or lease return.
That is the opposite logic to a gloss finish film, and it is why the two should not be swapped: coverage film on a showroom panel disappoints, finish film on a mine-site ute wastes money. The cheap vs premium PPF guide explains the split.
Which Film On
Which Panel
Fleet vehicles are mixed jobs. Bonnet leading edges and tray sides take FleetArmour; a bonnet face that the operator wants kept glossy takes Glanz. The 4WD paint protection film page and the panel by panel guide set out the zones.
Ordering At
Fleet Volume
Rolls are listed ex. GST in the online shop with no account needed, and orders over $1000 ex. GST ship free Australia-wide from Melbourne by CouriersPlease or TNT Road Express. For a standing monthly roll count, contact the team for volume terms.
Installation Gel in 16-litre drums and DFA Surface Cleaner in 24-can cartons ship with the film, so a fleet workshop restocks in one order. The PPF rolls page covers volume supply.
Warranty And
Registration For Fleets
FleetArmour carries a 3-year limited warranty under normal use and proper installation. Every roll is serialised and every installation registered through e-Warranty within 7 days of invoice, vehicle by vehicle, so a fleet of twenty utes has twenty records.
For fleet operators that record is an asset register entry: which vehicle was filmed, when, with which roll, by which installer. Terms are on the warranty page.
The warranty guide lists what is installation related, which matters when a fleet contract specifies who carries which risk.
Install Speed
On Large Panels
Fleet margins are made on install time. FleetArmour uses an easy-tack adhesive that repositions then grips, and stretch that clears sills and tray sides without lifting, so large flat sections go down fast. Cutting off the car on the DFA Plotter keeps blades away from paint on every vehicle in the run.
FleetArmour is a different film from the gloss lines and is not part of the ARPANSA test on Glanz; it is specified for abrasion and replacement, not showroom finish.
Dealerships, Fleets
And Tint
Dealerships filming new stock at pre-delivery use the same system; see the dealership page. Fleet cabins often take CoolVue window tint in the same visit, within the VLT limits of each state.
A free sample roll lets a fleet installer test FleetArmour on one vehicle before quoting the run.
FAQ
-
What is fleet protection film?
A sacrificial paint protection film for work vehicles: a layer on tray sides, sills and high-wear panels that is replaced when worn so the paint underneath stays original. Defcon FleetArmour is built for this job.
-
How long does FleetArmour last?
It carries a 3-year limited warranty under normal use and proper installation, and it is designed to be replaced rather than repaired when a section wears through.
-
Should the whole fleet vehicle be filmed in FleetArmour?
No. Leading edges, tray sides and sills take FleetArmour; a bonnet face the operator wants kept glossy takes Glanz. The panel guide sets out the zones.
-
Can I order fleet quantities?
Rolls are listed ex. GST in the online shop and orders over $1000 ex. GST ship free Australia-wide. For a standing monthly roll count, contact the team for volume terms.
-
Is every fleet vehicle registered separately?
Yes. Each installation is registered through e-Warranty within 7 days of invoice, so each vehicle has its own record tied to the roll serial.
-
Does FleetArmour self-heal like gloss film?
FleetArmour is specified for abrasion and replacement rather than showroom finish. For a self-healing gloss layer, use Glanz or Defcon ONE on the panels where finish matters.
-
Do you offer support in Chinese?
Yes. Bilingual consultation in English and Chinese is available through our WeChat channel, covering product selection, ordering and technical questions. 我们提供中英双语咨询。
Developed by Defcon Films Australia
Every Defcon film is built for Australian conditions: materials selected globally, proven on local roads, and made to install well.
