Developed by Defcon Films Australia

XPEL ALTERNATIVE AUSTRALIA

What switching suppliers actually involves, spec by spec.

Shops look at XPEL alternatives in Australia for concrete reasons: supply terms, support response, pattern access or margin. Whatever the trigger, the comparison should run on published numbers rather than brand reputation. Defcon's side of the table is public: aliphatic TPU at 190 microns ±10%, close to 10 kg puncture resistance, a 13-micron self-healing coat, ARPANSA-tested UV protection and warranties by line up to 12 years. This page sets out what a switch actually involves, from patterns to claims, and how to bench-test a free sample roll first.

Compare Films On Spec,
Not On Logos

Shops look at alternatives for concrete reasons: supply terms, support response, pattern access or margin. Whatever the trigger, the comparison should run on published numbers, not brand reputation. The same comparison for STEK, SunTek and 3M is on their own pages.

Defcon's side of the table is public: aliphatic TPU at 190 microns ±10%, close to 10 kg puncture resistance, a 13-micron self-healing coat, ARPANSA-tested UV protection, and line-specific warranties up to 12 years.

What A Switch
Actually Involves

Changing film brands is a workflow change, not just a logo change: patterns (OEMC software), plotter compatibility, training for your installers and a warranty system your completed jobs move onto.

Defcon supplies all four from one catalogue, with the free sample roll as the zero-cost first step.

Put Us To The
Same Test

Run the sample roll through your own workshop against whatever you stock today: stretch, tack, healing under heat, finish. The film either earns its place in your stock or it does not.

One Supplier,
Six Film Lines

A switch means one new online shop for every line you take on, and one support contact for all of them.

A switch can be partial: many shops move gloss work to Glanz or Defcon ONE first and keep testing Frozen, Spectra, FleetArmour, Crystal Shield and CoolVue as jobs come up.

Warranty
By Film Line

Each film line carries its own limited warranty: 12 years on Defcon ONE, 10 years on Glanz and Frozen PPF, 7 years on Spectra colour PPF, 3 years on Crystal Shield and FleetArmour, and a lifetime limited warranty on CoolVue window tint, always under normal use and proper installation. Full terms are on the warranty page.

After a switch, registration runs through e-Warranty within 7 days of invoice, on OEM paint by an authorised installer.

Compare claim procedures side by side: Defcon's is published on the warranty page.

Training &
Installer Support

PPF installation training and support come through the same team that supplies the film: the 3-Day PPF Installation Training, cutting software setup and tooling advice sit with one supplier rather than a separate vendor.

New installers can start with the Starter Pack, practice on the Practice Pack, then move to full rolls once confident. Technical questions are answered through our contact page, in English or Chinese.

Film Construction
& Testing

For the comparison table, Defcon's gloss construction is aliphatic TPU at 190 microns ±10%, close to 10 kg single-point puncture resistance, 13-micron self-healing top coat.

ARPANSA's test of Glanz clear TPU film (99.0% of UV blocked, reference UVR_25-0370-1) is the row to ask any incumbent brand to match with a published report of its own. For the wider field, the PPF brands comparison covers the framework.

FAQ

Developed by Defcon Films Australia

Every Defcon film is built for Australian conditions: materials selected globally, proven on local roads, and made to install well.

0
0
Your Cart
Your cart is emptyReturn to Shop